Directions

Thoroughly wet each side of the lens with OPTI-FREE REPLENISH Solution.
• Rub each side of the lens for 10 seconds (for a total rubbing time of
20 seconds).
• Rinse each side of the lens with a steady stream of OPTI-FREE REPLENISH Solution for 10 seconds (for a total rinsing time of
20 seconds).
• Fill your ALCON Lens Case with fresh OPTI-FREE REPLENISH Solution.
• Store lenses in the closed lens case overnight or at least 6 hours. After soaking, lenses are disinfected and ready to wear.
• If any debris remains on contact lenses, rinse with OPTI-FREE REPLENISH Solution prior to lens insertion. You may leave your lenses in the unopened lens case containing OPTI-FREE
REPLENISH Solution for up to 30 days. After this time, your lenses must be cleaned and disinfected with fresh OPTI-FREE REPLENISH Solution prior to wear

Usage Advice

Always wash and rinse your hands before you handle your lenses. To clean, disinfect and remove protein from your soft contact lenses: - Thoroughly rinse each side of the lens (5 seconds) with Opti-Free Replenish MPDS. - Fill your Alcon Lens Care with fresh Opti-Free Replenish MPDS. Store lenses in the closed lens case overnight or at least 6 hours. After soaking, lenses are ready to wear. If any debris remains on contact lenses, rinse with Opti-Free Replenish MPDS prior to insertion. You may leave your lenses in the closed lens case containing Opti-Free Replenish MPDS for up to 30 days. After this time, your lenses must be cleaned and disinfected with Opti-Free Replenish MPDS every 30 days and prior to wear.

Safety Directions

Your eyes are unique. Your eye care professional may recommend additional products or procedures to care for your lenses based upon your individual tear chemistry and lens-wearing schedule. Always follow your eye care professional's instructions. Do not change your directions for care of your lenses without consulting your eye care professional.
If your eye care professional directs you to rub your lenses, place several drops on the lens and rub for several seconds. Then follow the directions above.
See reverse of carton for complete instructions and important safety information.

Important Information

May contain Sodium Hydroxide and/or Hydrochloric Acid to control pH. Lasts 6 months once opened

Warnings

It is essential that you follow your eye care professional’s directions and all labeling instructions for proper use and care of your lenses and lens care products, including the lens case. Do not reuse or “top o_” solution in the lens case since this may reduce effective lens disinfection. Eye problems, including an infection or corneal ulcers, can develop rapidly and lead to loss of vision. If you experience persistent eye discomfort, excessive tearing, vision changes, or redness of the eye, IMMEDIATELY remove your lenses and consult your eye care professional as the problem could become more serious.

Caution

Do not swallow the solution.
Not for use with heat (thermal) disinfection.

Ingredients

Opti-Free Replenish MPDS is a sterile, buffered, isotonic, aqueous solution containing Sodium Citrate, Sodium Chloride, Sodium Borate, Propylene Glycol, Tearglyde proprietary dual action reconditioning system (Tetronic 1304 (Tetronic is a registered trademark of BASF.), Nonanoyl Ethylenediaminetriacetic Acid) (These ingredients are only found in Alcon's lens care products. This patented formula is not sold under any other name. Do not change solutions without consulting your eye care professional.) with Polyquad (Polyquaternium-1) (These ingredients are only found in Alcon's lens care products. This patented formula is not sold under any other name. Do not change solutions without consulting your eye care professional.) 0.001% and Aldox (Myristamidopropyl Dimethylamine) (These ingredients are only found in Alcon's lens care products. This patented formula is not sold under any other name. Do not change solutions without consulting your eye care professional) 0.0005% as preservatives and purified water.